Hpe Proliant ML10 v2 Gen9 Offers Server Technology For Small Businesses

Hpe Proliant ML10 v2 Gen9 Offers Server Technology For Small Businesses Leave a comment

The HP ProLiant ML10 v2 (P8B36A) Generation 9 Server is a single-socket 4U tower server with powerful architecture and good power efficiency delivering excellent value that businesses require to run a network environment. This reduces energy consumption and provides better cable management.

 

Hpe Proliant ML10 v2 Gen9 Offers Server Technology For Small Businesses

Small review of Hpe Proliant ML10 v2 Gen9

HP ProLiant ML10 v2 (P8B36A) G9 tower Server consists of 4 PCIe slots and Integrated Lights Out (iLO 4) management allows network administrators to easily update and check server remotely by reducing travel expenses. It is pre-installed with 2x1GbE and up to four 4PCIe slots to adapt grow to meet changing business needs. This server is scalable to any applications.

HP servers that are ordered online through the credit card. During this period, we take up all hp ml10 v2 server hardware, software repairs and exchange works possible based on the issues faced. We ensure that your hp ml10v2 server product works best for you and serve you with the best maximal performance within the warranty period offered.

Advantage of Hpe Proliant ML10 v2 Gen9

The HP ProLiant ML10 v2 (P8B36A) Gen9 tower Server provides 4 DIMM slots for error correcting code memory to protect businesses data loss. This hp tower server offers 4GB Memory and supports up to a maximum of 32 GB and 2133 MHz DDR3 UDIMM memory. Hence this server supports for a robust performance in case of big data analytics and object storage.

The HP ProLiant ML10 v2 (P8B36A) G8 Server supports up to 24 TB storage and it offers only 1 TB HDD data storage , 4 PCIe slots to support high IO functions. Proliant hp ml10v2 design allows for convenient expansion and easy installation to meet business needs, with support for up to 4 USB ports, 6 large form factor (LFF) hard disk drives and4 input/output slots.

Video of Hpe Proliant ML10 v2 Gen9

 

Performance

The HP ProLiant ML10 v2 (P8B36A) G9 1P tower Server consists of Intel Xeon E3-1200 v3 core i3 processor, 4GB RAM, 1 TB SATA HDD with a maximum of 32 GB and 4DIMM slots per server supporting in a 4U chassis offering improved performance and efficiency. Hewlett-Packard server consists of 4 PCIe Gen3 slots and flexible LOM that is suitable for high IO operations

Technical Specification

ProcessorIntel® Pentium® G3240 (3.1GHz/2-core/3MB/54W)
Cache Memory8MB (1 x 8MB) L3 Cache
ChipsetIntel® C222 Chipset
UpgradeabilityUpgradeable to 4 cores
On System Management ProcessorHPE iLO (Firmware: HPE iLO4)
Memory ProtectionECC
MemoryType HPE SmartMemory DDR3 Unbuffered (UDIMM) DIMM Slots Available 4 Maximum Capacity (UDIMM) 32GB (4 x 8GB UDIMM)
Network ControllerHPE Ethernet 1Gb 2-port 332i Adapter
HPE Server ROMThe HPE ProLiant ROM is used to configure the following:

• Processor and chipset status registers

• System memory, memory map, and memory initialization

• System hardware configuration (Integrated PCI devices and optional PCIe cards).

• Customer-specific BIOS configuration (using the HPE ROM-Based Setup Utility (RBSU).

Storage ControllerHPE Dynamic Smart Array B120i Controller
Internal Storage DevicesHPE Half-Height SATA DVD-ROM Optical Drive
Maximum Internal StorageNon Hot Plug LFF SATA 24TB 6 x 4TB
InterfacesVideo 1 (rear) Network RJ-45 (Ethernet) 2 (1 shared for HPE Integrated Lights-Out) USB 4 2 front, 2 rear(USB3.0)
Industry Standard ComplianceACPI 2.0b Compliant PCIe 3.0 Compliant PXE Support WOL Support Microsoft® Logo certifications USB 2.0 /3.0 Support
GraphicsIntegrated Matrox G200 video standard • 1280 x 1024 (32 bpp) • 1920 x 1200 (16 bpp) HPE iLO 4 On System Management Memory • 256 MB DDR 3 with ECC (112 MB after ECC and video)
Form FactorMicro ATX Tower (4U) chassis with feet/bezel: 14.5″ (36.82cm) Height x 6.89″ (17.5cm) Width x 18.71″ (47.52cm) Length 8 SFF Drive Bay Cage: 4.6″ (11.72cm) Height x 5.74″ (14.57cm) Width x 4.79″ (12.16cm) Length 4 LFF Drive Bay Cage: 4.6″ (11.72cm) Height x 5.74″ (14.57cm) Width x 6.90″ (17.54cm) Length

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *